Platform: Code4rena
Start Date: 31/01/2023
Pot Size: $90,500 USDC
Total HM: 47
Participants: 169
Period: 7 days
Judge: LSDan
Total Solo HM: 9
Id: 211
League: ETH
Rank: 86/169
Findings: 1
Award: $69.82
🌟 Selected for report: 0
🚀 Solo Findings: 0
🌟 Selected for report: c3phas
Also found by: 0xSmartContract, 0xackermann, 0xdaydream, Aymen0909, CodingNameKiki, Dewaxindo, Diana, IllIllI, Madalad, NoamYakov, Pheonix, Polaris_tow, ReyAdmirado, Rolezn, arialblack14, atharvasama, cryptostellar5, descharre, eyexploit, lukris02, saneryee
69.8247 USDC - $69.82
Issue | Instances | |
---|---|---|
[G-01] | Pack Struct | 1 |
[G-02] | Mark state variables as constant | 3 |
[G-03] | Use assembly for math (add, sub, mul, div) | 20 |
[G-04] | Right shift or Left shift instead of dividing or multiplying by powers of two | 1 |
[G-05] | Tightly pack storage variables | 2 |
[G-06] | Optimal Comparison | 5 |
[G-07] | Mark storage variables as immutable if they never change after contract initialization | 1 |
[G-08] | unchecked{++i} instead of i++ (or use assembly when applicable) | 21 |
When creating structs, make sure that the variables are listed in ascending order by data type. The compiler will pack the variables that can fit into one 32 byte slot. If the variables are not listed in ascending order, the compiler may not pack the data into one slot, causing additional sload
and sstore
instructions when reading/storing the struct into the contract's storage.
struct Escrow { /// @notice The escrowed token IERC20 token; /// @notice Timestamp of the start of the unlock uint32 start; /// @notice The timestamp the unlock ends at uint32 end; /// @notice The timestamp the index was last updated at uint32 lastUpdateTime; /// @notice Initial balance of the escrow uint256 initialBalance; /// @notice Current balance of the escrow uint256 balance; /// @notice Owner of the escrow address account;
│ Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 67717 ┆ 370 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ storeUnoptimizedStruct ┆ 66608 ┆ 66608 ┆ 66608 ┆ 66608 ┆ 1 │ ╰────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯ ╭──────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮ │ Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞══════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 54105 ┆ 302 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ storeOptimizedStruct ┆ 44468 ┆ 44468 ┆ 44468 ┆ 44468 ┆ 1 │ ╰──────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯
State variables can be declared as constant or immutable. In both cases, the variables cannot be modified after the contract has been constructed. For constant variables, the value has to be fixed at compile-time, while for immutable, it can still be assigned at construction time.
The compiler does not reserve a storage slot for these variables, and every occurrence is inlined by the respective value.
Compared to regular state variables, the gas costs of constant and immutable variables are much lower. For a constant variable, the expression assigned to it is copied to all the places where it is accessed and also re-evaluated each time. This allows for local optimizations. Immutable variables are evaluated once at construction time and their value is copied to all the places in the code where they are accessed. For these values, 32 bytes are reserved, even if they would fit in fewer bytes. Due to this, constant values can sometimes be cheaper than immutable values.
AdapterBase.sol: 517
address FEE_RECIPIENT = address(0x4444);
Vault.sol:467
uint256 public assetsCheckpoint;
VaultController.sol:36
bytes32 public immutable VAULT = "Vault"; bytes32 public immutable ADAPTER = "Adapter"; bytes32 public immutable STRATEGY = "Strategy"; bytes32 public immutable STAKING = "Staking"; bytes4 internal immutable DEPLOY_SIG = bytes4(keccak256("deploy(bytes32,bytes32,bytes)"));
╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮ │ Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 54593 ┆ 198 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ addValue ┆ 2302 ┆ 2302 ┆ 2302 ┆ 2302 ┆ 1 │ ╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 38514 ┆ 239 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ addImmutableValue ┆ 199 ┆ 199 ┆ 199 ┆ 199 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract2 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 32287 ┆ 191 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ addConstantValue ┆ 199 ┆ 199 ┆ 199 ┆ 199 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
## [G-03] **Use assembly for math (add, sub, mul, div)** Use assembly for math instead of Solidity. You can check for overflow/underflow in assembly to ensure safety. If using Solidity versions < 0.8.0 and you are using Safemath, you can gain significant gas savings by using assembly to calculate values and checking for overflow/underflow. ## **INSTANCES** YearnAdapter.sol:102 ```solidity return _yTotalAssets() - _calculateLockedProfit();
return IERC20(asset()).balanceOf(address(yVault)) + yVault.totalDebt();
uint256 lockedFundsRatio = (block.timestamp - yVault.lastReport()) *
lockedProfit - ((lockedFundsRatio * lockedProfit) / DEGRADATION_COEFFICIENT);
return _depositLimit - assets;
shares = convertToShares(assets) - feeShares;
1e18 - depositFee,
assets = convertToAssets(shares + feeShares);
1e18 - withdrawalFee,
_approve(owner, msg.sender, allowance(owner, msg.sender) - shares);
_approve(owner, msg.sender, allowance(owner, msg.sender) - shares);
assets = convertToAssets(shares - feeShares);
assets - assets.mulDiv(uint256(fees.deposit), 1e18, Math.Rounding.Down)
1e18 - depositFee,
1e18 - withdrawalFee,
? managementFee.mulDiv( totalAssets() * (block.timestamp - feesUpdatedAt),
(shareValue - highWaterMark) * totalSupply(),
uint256 currentAssets = totalAssets();
if (block.timestamp < proposedFeeTime + quitPeriod)
if (block.timestamp < proposedAdapterTime + quitPeriod)
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 40493 ┆ 233 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ addTest ┆ 303 ┆ 303 ┆ 303 ┆ 303 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37087 ┆ 216 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ addAssemblyTest ┆ 263 ┆ 263 ┆ 263 ┆ 263 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract2 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 40293 ┆ 232 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ subTest ┆ 300 ┆ 300 ┆ 300 ┆ 300 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract3 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37287 ┆ 217 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ subAssemblyTest ┆ 263 ┆ 263 ┆ 263 ┆ 263 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract4 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 41893 ┆ 240 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ mulTest ┆ 325 ┆ 325 ┆ 325 ┆ 325 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract5 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37087 ┆ 216 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ mulAssemblyTest ┆ 265 ┆ 265 ┆ 265 ┆ 265 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract6 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 41893 ┆ 240 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ divTest ┆ 325 ┆ 325 ┆ 325 ┆ 325 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract7 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37287 ┆ 217 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ divAssemblyTest ┆ 265 ┆ 265 ┆ 265 ┆ 265 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
? managementFee.mulDiv( totalAssets() * (block.timestamp - feesUpdatedAt), SECONDS_PER_YEAR, Math.Rounding.Down ) / 1e18 : 0;
When defining storage variables, make sure to declare them in ascending order, according to size. When multiple variables are able to fit into one 256 bit slot, this will save storage size and gas during runtime. For example, if you have a bool
, uint256
and a bool
, instead of defining the variables in the previously mentioned order, defining the two boolean variables first will pack them both into one storage slot since they only take up one byte of storage.
AdapterBase.sol:27
╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮ │ src/test/GasTest.t.sol:Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 122268 ┆ 334 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ accessNonTightlyPacked ┆ 32774 ┆ 32774 ┆ 32774 ┆ 32774 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯ ╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮ │ src/test/GasTest.t.sol:Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 126247 ┆ 356 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ accessTightlyPacked ┆ 15476 ┆ 15476 ┆ 15476 ┆ 15476 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯
When comparing integers, it is cheaper to use strict >
& <
operators over >=
& <=
operators, even if you must increment or decrement one of the operands. Note: before using this technique, it's important to consider whether incrementing/decrementing one of the operators could result in an over/underflow.
This optimization is applicable when the optimizer is turned off.
newFees.deposit >= 1e18 || newFees.withdrawal >= 1e18 || newFees.management >= 1e18 || newFees.performance >= 1e18
YearnAdapter.sol:150
if (assets >= _depositLimit) return 0;
──────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ src/test/GasTest.t.sol:Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37487 ┆ 218 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ gte ┆ 330 ┆ 330 ┆ 330 ┆ 330 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ src/test/GasTest.t.sol:Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37487 ┆ 218 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ gtPlusMinusOne ┆ 327 ┆ 327 ┆ 327 ┆ 327 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ src/test/GasTest.t.sol:Contract2 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37487 ┆ 218 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ lte ┆ 330 ┆ 330 ┆ 330 ┆ 330 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯ ╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ src/test/GasTest.t.sol:Contract3 contract ┆ ┆ ┆ ┆ ┆ │ ╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37487 ┆ 218 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ ltPlusOne ┆ 327 ┆ 327 ┆ 327 ┆ 327 ┆ 1 │ ╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
immutable
if they never change after contract initialization.State variables can be declared as constant or immutable. In both cases, the variables cannot be modified after the contract has been constructed. For constant variables, the value has to be fixed at compile-time, while for immutable, it can still be assigned at construction time.
The compiler does not reserve a storage slot for these variables, and every occurrence is inlined by the respective value.
Compared to regular state variables, the gas costs of constant and immutable variables are much lower. For a constant variable, the expression assigned to it is copied to all the places where it is accessed and also re-evaluated each time. This allows for local optimizations. Immutable variables are evaluated once at construction time and their value is copied to all the places in the code where they are accessed. For these values, 32 bytes are reserved, even if they would fit in fewer bytes. Due to this, constant values can sometimes be cheaper than immutable values.
MultiRewardEscrow.sol:191
address public feeRecipient;
unchecked{++i}
instead of i++
(or use assembly when applicable)Use ++i
instead of i++
. This is especially useful in for loops but this optimization can be used anywhere in your code. You can also use unchecked{++i;}
for even more gas savings but this will not check to see if i
overflows. For extra safety if you are worried about this, you can add a require statement after the loop checking if i
is equal to the final incremented value. For best gas savings, use inline assembly, however this limits the functionality you can achieve. For example you cant use Solidity syntax to internally call your own contract within an assembly block and external calls must be done with the call()
or delegatecall()
instruction. However when applicable, inline assembly will save much more gas.
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint8 i; i < len; i++) {
nonces[owner]++,
for (uint8 i = 0; i < len; i++) {
for (uint8 i = 0; i < len; i++) {
for (uint8 i = 0; i < len; i++) {
for (uint8 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
for (uint256 i = 0; i < len; i++) {
╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮ │ Contract0 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37687 ┆ 219 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ iPlusPlus ┆ 2039 ┆ 2039 ┆ 2039 ┆ 2039 ┆ 1 │ ╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯ ╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮ │ Contract1 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 37287 ┆ 217 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ plusPlusI ┆ 1989 ┆ 1989 ┆ 1989 ┆ 1989 ┆ 1 │ ╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯ ╭────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮ │ Contract3 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 42693 ┆ 244 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ safeUncheckedPlusPlusI ┆ 1355 ┆ 1355 ┆ 1355 ┆ 1355 ┆ 1 │ ╰────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯ ╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮ │ Contract2 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 35887 ┆ 210 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ uncheckedPlusPlusI ┆ 1329 ┆ 1329 ┆ 1329 ┆ 1329 ┆ 1 │ ╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯ ╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮ │ Contract4 contract ┆ ┆ ┆ ┆ ┆ │ ╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡ │ Deployment Cost ┆ Deployment Size ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ 26881 ┆ 164 ┆ ┆ ┆ ┆ │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ Function Name ┆ min ┆ avg ┆ median ┆ max ┆ # calls │ ├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤ │ inlineAssemblyLoop ┆ 709 ┆ 709 ┆ 709 ┆ 709 ┆ 1 │ ╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
#0 - c4-judge
2023-02-28T14:50:36Z
dmvt marked the issue as grade-b