Y2k Finance contest - 0xSmartContract's results

Low Risk Issues List

Total 6 issues

Non-Critical Issues List

Total 12 issues

[L-01] Missing Event for critical parameters change

Context: Vault.sol#L182-L193 VaultFactory.sol#L248-L266

Description: Events help non-contract tools to track changes, and events prevent users from being surprised by changes.

Recommendation: Add event-emit

[L-02] Add to Blacklist function

Description: Cryptocurrency mixing service, Tornado Cash, has been blacklisted in the OFAC. A lot of blockchain companies, token projects, NFT Projects have blacklisted all Ethereum addresses owned by Tornado Cash listed in the US Treasury Department's sanction against the protocol. https://home.treasury.gov/policy-issues/financial-sanctions/recent-actions/20220808 In addition, these platforms even ban accounts that have received ETH on their account with Tornadocash.

Some of these Projects;

• USDC (https://www.circle.com/en/usdc)
• Flashbots (https://www.paradigm.xyz/portfolio/flashbots )
• Aave (https://aave.com/)
• Uniswap
• Balancer
• Infura
• Alchemy
• Opensea
• dYdX

Details on the subject; https://twitter.com/bantg/status/1556712790894706688?s=20&t=HUTDTeLikUr6Dv9JdMF7AA

https://cryptopotato.com/defi-protocol-aave-bans-justin-sun-after-he-randomly-received-0-1-eth-from-tornado-cash/

For this reason, every project in the Ethereum network must have a blacklist function, this is a good method to avoid legal problems in the future, apart from the current need.

Transactions from the project by an account funded by Tonadocash or banned by OFAC can lead to legal problems.Especially American citizens may want to get addresses to the blacklist legally, this is not an obligation

If you think that such legal prohibitions should be made directly by validators, this may not be possible: https://www.paradigm.xyz/2022/09/base-layer-neutrality

The ban on Tornado Cash makes little sense, because in the end, no one can prevent people from using other mixer smart contracts, or forking the existing ones. It neither hinders cybercrime, nor privacy.

Here is the most beautiful and close to the project example; Manifold

Manifold Contract https://etherscan.io/address/0xe4e4003afe3765aca8149a82fc064c0b125b9e5a#code

     modifier nonBlacklistRequired(address extension) {
         require(!_blacklistedExtensions.contains(extension), "Extension blacklisted");
         _;
     }

Recommended Mitigation Steps add to Blacklist function and modifier.

[L-03] Return value of transfer not checked

Context: Vault.sol#L167 Vault.sol#L228 Vault.sol#L365

Description: When there’s a failure in transfer()/transferFrom() the function signature has a boolean return value and they indicate errors that way instead. By not checking the return value, operations that should have marked as failed, may potentially go through without actually making a payment.

Recommendation: Add return value checks.

[L-04] Use abi.encode() to avoid collision

Context: Controller.sol#L180 Controller.sol#L236

Description: If you use keccak256(abi.encodePacked(a, b)) and both a and b are dynamic types, it is easy to craft collisions in the hash value by moving parts of a into b and vice-versa. More specifically, abi.encodePacked("a", "bc") == abi.encodePacked("ab", "c"). If you use abi.encodePacked for signatures, authentication or data integrity, make sure to always use the same types and check that at most one of them is dynamic. Unless there is a compelling reason, abi.encode should be preferred.

When are these used? abi.encode: abi.encode encode its parameters using the ABI specs. The ABI was designed to make calls to contracts. Parameters are padded to 32 bytes. If you are making calls to a contract you likely have to use abi.encode If you are dealing with more than one dynamic data type as it prevents collision.

abi.encodePacked: abi.encodePacked encode its parameters using the minimal space required by the type. Encoding an uint8 it will use 1 byte. It is used when you want to save some space, and not calling a contract.Takes all types of data and any amount of input.

Proof of Concept:

contract Contract0 {

    // abi.encode
    // (AAA,BBB) keccak = 0xd6da8b03238087e6936e7b951b58424ff2783accb08af423b2b9a71cb02bd18b
    // (AA,ABBB) keccak = 0x54bc5894818c61a0ab427d51905bc936ae11a8111a8b373e53c8a34720957abb
    function collision(string memory _text, string memory _anotherText)
        public pure returns (bytes32)
    {
        return keccak256(abi.encode(_text, _anotherText));
    }
}

contract Contract1 {

    // abi.encodePacked
    // (AAA,BBB) keccak = 0xf6568e65381c5fc6a447ddf0dcb848248282b798b2121d9944a87599b7921358
    // (AA,ABBB) keccak = 0xf6568e65381c5fc6a447ddf0dcb848248282b798b2121d9944a87599b7921358

    function hard(string memory _text, string memory _anotherText)
        public pure returns (bytes32)
    {
        return keccak256(abi.encodePacked(_text, _anotherText));
    }
}

[L-05] Additional steps for srice feeds

Description: By Chainlink, which the project uses in price feeds; to help you prepare for unforeseen market events, it is recommended to take additional steps to feeds to protect your practice or protocol. There is no information in the documents about additional steps. https://docs.chain.link/docs/selecting-data-feeds/#risk-mitigation

Risk Mitigation As a development best practice, design your systems and smart contracts to be resilient and mitigate risk to your protocol and your users. Ensure that your systems can tolerate known and unknown exceptions that might occur. Some examples include but are not limited to volatile market conditions, the degraded performance of infrastructure, chains, or networks, and any other upstream outage related to data providers or node operators. You bear responsibility for any manner in which you use the Chainlink Network, its software and documentation.

To help you prepare for unforeseen market events, we recommend taking additional steps for custom or specialized feeds to protect your application or protocol. This might also be worth considering in all categories based on the value that your application secures. This tooling is put in place to mitigate extreme market events, possible malicious activity on third-party venues or contracts, potential delays, performance degradation, and outages. Below are some examples of tooling that Chainlink users have put in place:

• Circuit breakers: In the case of an extreme price event, the contract would pause operations for a limited period of time.
• Contract update delays: Contracts would not update until the protocol had received a recent fresh input from the data feed.
• Manual kill switch: If a vulnerability or bug is discovered in one of the upstream contracts, the user can manually cease operation and temporarily sever the connection to the data feed.
• Monitoring: Some users create their own monitoring alerts based on deviations in the data feeds that they are using.
• Soak testing: Users are strongly advised to thoroughly test price feed integrations and incorporate a soak period prior to providing access to end users or securing value.

For more detailed information about some of these examples, see the Monitoring data feeds documentation.

For important updates regarding the use of Chainlink Price Feeds, users should join the official Chainlink Discord and subscribe to the data-feeds-user-notifications channel: https://discord.gg/Dqy5N9UbsR

[L-06] No Check if onERC1155Received is implemented

Context: SemiFungibleVault.sol#L96

Description: The SemiFungibleVault.solcontract, function deposit() will mint to 1155 NFT. When minting a NFT, the function does not check if a receiving contract implements onERC1155Received().

Recommendation: The intention behind this function is to check if the address receiving the NFT, if it is a contract, implements onERC1155Received(). Thus, there is no check whether the receiving address supports ERC-1155 tokens and position could be not transferrable in some cases. If this is intended, safemint should be used instead of mint

[N-01] Use require instead of assert

Context: Vault.sol#L190

Description: Assert should not be used except for tests, require should be used

Prior to Solidity 0.8.0, pressing a confirm consumes the remainder of the process's available gas instead of returning it, as request()/revert() did.

Assertion() should be avoided even after solidity version 0.8.0, because its documentation states "The Assert function generates an error of type Panic(uint256). Code that works properly should never Panic, even on invalid external input. If this happens, you need to fix it in your contract. there's a mistake".

[N-02] Include return parameters in NatSpec comments

Context: All Contracts

Description: It is recommended that Solidity contracts are fully annotated using NatSpec for all public interfaces (everything in the ABI). It is clearly stated in the Solidity official documentation. In complex projects such as Defi, the interpretation of all functions and their arguments and returns is important for code readability and auditability.

https://docs.soliditylang.org/en/v0.8.15/natspec-format.html

Recommendation:

Include return parameters in NatSpec comments.

Recommendation Code Style: (from Uniswap3)

    /// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
    /// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
    /// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
    /// on tickLower, tickUpper, the amount of liquidity, and the current price.
    /// @param recipient The address for which the liquidity will be created
    /// @param tickLower The lower tick of the position in which to add liquidity
    /// @param tickUpper The upper tick of the position in which to add liquidity
    /// @param amount The amount of liquidity to mint
    /// @param data Any data that should be passed through to the callback
    /// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
    /// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
    function mint(
        address recipient,
        int24 tickLower,
        int24 tickUpper,
        uint128 amount,
        bytes calldata data
    ) external returns (uint256 amount0, uint256 amount1);

[N-03] 0 address check

Context: SemiFungibleVault.sol#L66 Vault.sol#L115 Vault.sol#L155 Vault.sol#L360 StakingRewards.sol#L73-L79

Description: Also check of the address to protect the code from 0x0 address problem just in case. This is best practice or instead of suggesting that they verify address != 0x0, you could add some good NatSpec comments explaining what is valid and what is invalid and what are the implications of accidentally using an invalid address.

Recommendation: like this; if (_treasury == address(0)) revert ADDRESS_ZERO();

[N-04] Long lines are not suitable for the Solidity Style Guide

Context: VaultFactory.sol#L263 VaultFactory.sol#L272-L273 RewardsFactory.sol#L83

Description: It is generally recommended that lines in the source code should not exceed 80-120 characters. Today's screens are much larger, so in some cases it makes sense to expand that. The lines above should be split when they reach that length, as the files will most likely be on GitHub and GitHub always uses a scrollbar when the length is more than 164 characters.

why-is-80-characters-the-standard-limit-for-code-width

Recommendation: Multiline output parameters and return statements should follow the same style recommended for wrapping long lines found in the Maximum Line Length section.

https://docs.soliditylang.org/en/v0.8.17/style-guide.html#introduction

thisFunctionCallIsReallyLong(
    longArgument1,
    longArgument2,
    longArgument3
);

[N-05] Undefined dependencies

Context: Vault.sol#L10

Description: OpenZeppelin's dependency " @openzeppelin/contracts/ " is not defined in package.json

package.json : 
 {
  "scripts": {
    "solhint": "./node_modules/.bin/solhint -f table src/**/*.sol",
    "format": "prettier --write .",
    "format:check": "prettier --check '*/**/*.{js,sol,json,md,ts}'",
    "lint": "solhint 'src/**/*.sol'",
    "prettier": "prettier --write 'src/**/*.sol'",
    "prepare": "husky install"
  },
  "devDependencies": {
    "husky": "^8.0.0",
    "prettier": "^2.6.2",
    "prettier-plugin-solidity": "*",
    "scripty": "^2.1.0",
    "solhint": "^3.3.7"
  },
  "dependencies": {
    "solhint-plugin-prettier": "^0.0.5"
  }
}

Recommendation: Add to OpenZeppelin dependencies in package.json

[N-06] For modern and more readable code; update import usages

Context: Controller.sol#L5-L8 PegOracle.sol#L4

Description: Our Solidity code is also cleaner in another way that might not be noticeable: the struct Point. We were importing it previously with global import but not using it. The Point struct polluted the source code with an unnecessary object we were not using because we did not need it. This was breaking the rule of modularity and modular programming: only import what you needSpecific imports with curly braces allow us to apply this rule better.

Recommendation: import {contract1 , contract2} from "filename.sol";

[N-07] Use scientific notation

Context: PegOracle.sol#L78

Description: In its Major multiples, scientific notation should be used (eg: 1e5), not decimal notation (eg 100000) for readability.

Recommendation: Use scientific notation.

[N-08] Avoid the same variable names in contracts that receive inherit

Context: VaultFactory.sol#L15 Vault.sol#L35

Description: There is a state variable named treasury above, which is not a good practice in terms of code readability, it may cause problems with upgradability of the project.

Recommendation: Use different State Variable names.

[N-09] Add to indexed parameter for countable Events

Context: SemiFungibleVault.sol#L36 SemiFungibleVault.sol#L52 VaultFactory.sol#L51 VaultFactory.sol#L91

Description: Add to indexed parameter for countable Events

Recommendation: Add Event-Emit

[N-10] WETH address definition can be use directly

Context: VaultFactory.sol#L13

Description: WETH is a wrap Ether contract with a specific address in the Etherum network, giving the option to define it may cause false recognition, it is healthier to define it directly.

Advantages of defining a specific contract directly:

• It saves gas,
• Prevents incorrect argument definition,
• Prevents execution on a different chain and re-signature issues,

WETH Address : 0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2

constructor(address _manager, address _weth) payable initializer {
        manager = IManager(_manager);
        WETH = _weth;
    }

Recommendation:

address private constant WETH = 0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2;

    constructor(address _manager) payable initializer {
        manager = IManager(_manager);
}

[N-11] Empty blocks should be removed or Emit something

Context: SemiFungibleVault.sol#L276-L286

Description: Code contains empty block.

Recommendation: The code should be refactored such that they no longer exist, or the block should do something useful, such as emitting an event or reverting.

[N-12] Open TODOs

Context: Vault.sol#L196

Recommendation: Use temporary TODOs as you work on a feature, but make sure to treat them before merging. Either add a link to a proper issue in your TODO, or remove it from the code.

Gas Optimizations List

Total 16 issues

Suggestion

Total 1 suggestion

[G-01] No need return keyword for gas efficient [~10 / ~2000 gas saved]

Context: Vault.sol#L173 Vault.sol#L192

Recommendation: You must remove the return keyword from the specified contexts.

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0.token();
        c1.token();
    }
}

contract Contract0 {
     address addr = 0x5B38Da6a701c568545dCfcB03FcB875f56beddC4;
     function token() external view returns (address) {
        return addr;
    }
}

contract Contract1 {
    address addr = 0x5B38Da6a701c568545dCfcB03FcB875f56beddC4;
     function token() external view returns (address) {
        addr;
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 50817                                     ┆ 211             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ token                                     ┆ 2258            ┆ 2258 ┆ 2258   ┆ 2258 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 46011                                     ┆ 187             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ token                                     ┆ 149             ┆ 149 ┆ 149    ┆ 149 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

[G-02] Using uint256 instead of bool in mappings is more gas efficient [146 gas per instance]

Context:  Vault.sol#L52-L54

Description: OpenZeppelin uint256 and bool comparison : Booleans are more expensive than uint256 or any type that takes up a full word because each write operation emits an extra SLOAD to first read the slot's contents, replace the bits taken up by the boolean, and then write back. This is the compiler's defense against contract upgrades and pointer aliasing, and it cannot be disabled.The values being non-zero value makes deployment a bit more expensive.

Use uint256(1) and uint256(2) for true/false to avoid a Gwarmaccess (100 gas) for the extra SLOAD, and to avoid Gsset (20000 gas) when changing from ‘false’ to ‘true’, after having been ‘true’ in the past.

Recommendation: Use uint256(1) and uint256(2) instead of bool.

Proof Of Concept: The optimizer was turned on and set to 10000 runs

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
     
        c0._setPolicyPermissions(0x5B38Da6a701c568545dCfcB03FcB875f56beddC4, 79, true);
        c1._setPolicyPermissions(0x5B38Da6a701c568545dCfcB03FcB875f56beddC4, 79, 2);
    }
}

contract Contract0 {
    mapping(address => mapping(uint256  => bool)) public modulePermissions;
    error boolcheck();

    function _setPolicyPermissions(address addr_, uint256 id, bool log) external {
       modulePermissions[addr_][id] = log; 
       if(modulePermissions[addr_][id] = false) revert boolcheck();
    }
}
contract Contract1 {
    mapping(address => mapping(uint256  => uint256)) public modulePermissions;
    error boolcheck();

    // Use uint256 instead of bool    (1 = false , 2 = true) 
    function _setPolicyPermissions(address addr_, uint256 id, uint256 log) external {
       modulePermissions[addr_][id] == log; 
       if(modulePermissions[addr_][id] == 1) revert boolcheck();
    }
}

Gas Report

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 88335                                     ┆ 473             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ _setPolicyPermissions                     ┆ 2750            ┆ 2750 ┆ 2750   ┆ 2750 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 87135                                     ┆ 467             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ _setPolicyPermissions                     ┆ 2604            ┆ 2604 ┆ 2604   ┆ 2604 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

[G-03] Use assembly to write address storage values [33 gas per instance]

Context: SemiFungibleVault.sol#L66-L72, Vault.sol#L133, Vault.sol#L134, Vault.sol#L135, Vault.sol#L136, Vault.sol#L137, Vault.sol#L138, Vault.sol#L298, VaultFactory.sol#L157, VaultFactory.sol#L158, VaultFactory.sol#L159, VaultFactory.sol#L160, VaultFactory.sol#L312, VaultFactory.sol#L298, RewardsFactory.sol#L68, RewardsFactory.sol#L69, RewardsFactory.sol#L70, StakingRewards.sol#L81, StakingRewards.sol#L82, StakingRewards.sol#L83, StakingRewards.sol#L84, StakingRewards.sol#L85, StakingRewards.sol#L86, PegOracle.sol#L33, PegOracle.sol#L34, PegOracle.sol#L36

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTestFoundry is DSTest {
    Contract1 c1;
    Contract2 c2;
    
    function setUp() public {
        c1 = new Contract1();
        c2 = new Contract2();
    }
    
    function testGas() public {
        c1.setRewardTokenAndAmount(0x5B38Da6a701c568545dCfcB03FcB875f56beddC4, 356);
        c2.setRewardTokenAndAmount(0x5B38Da6a701c568545dCfcB03FcB875f56beddC4, 356);
    }
}

contract Contract1  {
    address rewardToken ;
    uint256 reward;

    function setRewardTokenAndAmount(address token_, uint256 reward_) external {
        rewardToken = token_;
        reward = reward_;
    }
}

contract Contract2  {
    address rewardToken ;
    uint256 reward;

    function setRewardTokenAndAmount(address token_, uint256 reward_) external {
        assembly {
            sstore(rewardToken.slot, token_)
            sstore(reward.slot, reward_)           

        }
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆       ┆        ┆       ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 50899                                     ┆ 285             ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg   ┆ median ┆ max   ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ setRewardTokenAndAmount                   ┆ 44490           ┆ 44490 ┆ 44490  ┆ 44490 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮
│ src/test/GasTest.t.sol:Contract2 contract ┆                 ┆       ┆        ┆       ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 38087                                     ┆ 221             ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg   ┆ median ┆ max   ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ setRewardTokenAndAmount                   ┆ 44457           ┆ 44457 ┆ 44457  ┆ 44457 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯

[G-04] Using private rather than public for constans, saves gas [10 gas per instance]

Context: Controller.sol#L16

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0.gas();
        c1.gas();
    }
}

contract Contract0 {
    
    uint256 public constant BASE_GAS = 36000;
    
    function gas() external returns(uint256 gasPrice) {
        gasPrice = gasleft() + BASE_GAS;
    }
}

contract Contract1 {
    
    uint256 private constant BASE_GAS = 36000;
    
    function gas() external returns(uint256 gasPrice) {
        gasPrice = gasleft() + BASE_GAS;
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 43693                                     ┆ 249             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ gas                                       ┆ 263             ┆ 263 ┆ 263    ┆ 263 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 40893                                     ┆ 235             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ gas                                       ┆ 253             ┆ 253 ┆ 253    ┆ 253 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

[G-05] Function ordering via MethodID [22 gas per instance]

Context:  All Contracts

Description:  Contracts most called functions could simply save gas by function ordering via Method ID. Calling a function at runtime will be cheaper if the function is positioned earlier in the order (has a relatively lower Method ID) because 22 gas are added to the cost of a function for every position that came before it. The caller can save on gas if you prioritize most called functions. 

Recommendation:  Find a lower method ID name for the most called functions for example Call() vs. Call1() is cheaper by 22 gas For example, the function IDs in the Vault.sol contract will be the most used; A lower method ID may be given.

Proof of Consept: https://coinsbench.com/advanced-gas-optimizations-tips-for-solidity-85c47f413dc5

Vault.solfunction names can be named and sorted according to MethodID

Sighash   |   Function Signature
========================
74715614  =>  createAssets(uint256,uint256,uint256)
94605857  =>  totalAssets(uint256)
8dbdbe6d  =>  deposit(uint256,uint256,address)
56150edf  =>  depositETH(uint256,address)
71b3177a  =>  withdraw(uint256,uint256,address,address)
a5054b5b  =>  calculateWithdrawalFeeValue(uint256,uint256)
b14f2a39  =>  changeTreasury(address)
28337df6  =>  changeTimewindow(uint256)
3cebb823  =>  changeController(address)
4cbd43de  =>  endEpoch(uint256,bool)
3e048365  =>  setClaimTVL(uint256,uint256)
29322e05  =>  sendTokens(uint256,address)
6f7e9bd5  =>  beforeWithdraw(uint256,uint256)
d662b92d  =>  epochsLength()
8fc710cb  =>  getNextEpoch(uint256)

[G-06] x += y costs more gas than x = x + y for state variables [16 gas per instance]

Context: VaultFactory.sol#L195

Description: x += y costs more gas than x = x + y for state variables.

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0.foo(33);
        c1.foo(33);
    }
}

contract Contract0 {
    uint256 _totalBorrow = 60;
    
    function foo(uint256 _interestEarned) public {
        _totalBorrow += interestEarned;
    }
}

contract Contract1 {
    uint256 _totalBorrow = 60;
    function foo(uint256 _interestEarned) public {
        _totalBorrow = _totalBorrow + interestEarned;
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 70805                                     ┆ 279             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 5302            ┆ 5302 ┆ 5302   ┆ 5302 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 69805                                     ┆ 274             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 5286            ┆ 5286 ┆ 5286   ┆ 5286 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

[G-07] Use assembly to check for address(0) [6 gas per instance]

Context:  Controller.sol#L126, Controller.sol#L129, Controller.sol#L132, Vault.sol#L124, Vault.sol#L127, Vault.sol#L130, VaultFactory.sol#L149, VaultFactory.sol#L151, VaultFactory.sol#L154, VaultFactory.sol#L192, VaultFactory.sol#L221, VaultFactory.sol#L254, VaultFactory.sol#L296, VaultFactory.sol#L349, VaultFactory.sol#L367, VaultFactory.sol#L369

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    function testGas() public view {
        c0.setOperator(address(this));
        c1.setOperator(address(this));
    }
}
contract Contract0 {
    error Callback_InvalidParams();
    function setOperator(address operator_) public pure {
        if (address(operator_) == address(0)) revert Callback_InvalidParams();
    }
}
contract Contract1 {
    function setOperator(address operator_) public pure {
        assembly {
            if iszero(operator_) {
                mstore(0x00, "Callback_InvalidParams")
                revert(0x00, 0x20)
            }
        }
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 50899                                     ┆ 285             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ setOperator                               ┆ 258             ┆ 258 ┆ 258    ┆ 258 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 44893                                     ┆ 255             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ setOperator                               ┆ 252             ┆ 252 ┆ 252    ┆ 252 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

[G-08] Using >= instead of > is more gas efficient [3 gas per instance]

Context: PegOracle.sol#L98 PegOracle.sol#L121

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0._castVote0(2);
        c1._castVote1(2);
    }
}

contract Contract0 {
error INVALID_VOTE0();

    function _castVote0(uint256 _support) public returns (uint256) {
        if (_support >= 3) revert INVALID_VOTE0();
        return _support;
    }
}

contract Contract1 {
error INVALID_VOTE1();

    function _castVote1(uint256 _support) public returns (uint256) {
        if (_support > 2) revert INVALID_VOTE1();
        return _support;
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 43893                                     ┆ 250             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ _castVote0                                ┆ 275             ┆ 275 ┆ 275    ┆ 275 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 44093                                     ┆ 251             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ _castVote1                                ┆ 278             ┆ 278 ┆ 278    ┆ 278 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

[G-09] Deploy the contract with clone instead of new

Context: VaultFactory.sol#L199 VaultFactory.sol#L209 RewardsFactory.sol#L99 RewardsFactory.sol#L108

Description: There’s a way to save a significant amount of gas on deployment using Clones:  https://www.youtube.com/watch?v=3Mw-pMmJ7TA It is extremely inexpensive to distribute by cloneing with Create2

Gas usage difference between the two? (answer: a new clone is 10x cheaper)

[G-10] It is more efficient to use abi.encodePacked instead of abi.encode [164 gas saved]

Context: RewardsFactory.sol#L118

Description: It is more efficient to use abi.encodePacked instead of abi.encode.

When are these used? abi.encode: abi.encode encode its parameters using the ABI specs. The ABI was designed to make calls to contracts. Parameters are padded to 32 bytes. If you are making calls to a contract you likely have to use abi.encode If you are dealing with more than one dynamic data type as it prevents collision.

abi.encodePacked: abi.encodePacked encode its parameters using the minimal space required by the type. Encoding an uint8 it will use 1 byte. It is used when you want to save some space, and not calling a contract.Takes all types of data and any amount of input.

contract GasTest is DSTest {
  
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        
        c0.collision("AAA","BBB");
        c1.hard("AAA","BBB");
    }
}

contract Contract0 {

    // abi.encode
    // (AAA,BBB) keccak = 0xd6da8b03238087e6936e7b951b58424ff2783accb08af423b2b9a71cb02bd18b
    // (AA,ABBB) keccak = 0x54bc5894818c61a0ab427d51905bc936ae11a8111a8b373e53c8a34720957abb
    function collision(string memory _text, string memory _anotherText)
        public pure returns (bytes32)
    {
        return keccak256(abi.encode(_text, _anotherText));
    }
}

contract Contract1 {

    // abi.encodePacked
    // (AAA,BBB) keccak = 0xf6568e65381c5fc6a447ddf0dcb848248282b798b2121d9944a87599b7921358
    // (AA,ABBB) keccak = 0xf6568e65381c5fc6a447ddf0dcb848248282b798b2121d9944a87599b7921358

    function hard(string memory _text, string memory _anotherText)
        public pure returns (bytes32)
    {
        return keccak256(abi.encodePacked(_text, _anotherText));
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 132377                                    ┆ 693             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ collision                                 ┆ 1737            ┆ 1737 ┆ 1737   ┆ 1737 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 119365                                    ┆ 628             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ hard                                      ┆ 1573            ┆ 1573 ┆ 1573   ┆ 1573 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

[G-11] Setting the constructor to payable [13 gas per instance]

Context: RewardsFactory.sol#L63 StakingRewards.sol#L72 PegOracle.sol#L22 Controller.sol#L121 Vault.sol#L114 VaultFactory.sol#L144

Description: You can cut out 10 opcodes in the creation-time EVM bytecode if you declare a constructor payable. Making the constructor payable eliminates the need for an initial check of msg.value == 0 and saves 13 gas on deployment with no security risks.

Recommendation: Set the constructor to payable

Proof Of Concept: https://forum.openzeppelin.com/t/a-collection-of-gas-optimisation-tricks/19966/5?u=pcaversaccio

The optimizer was turned on and set to 10000 runs.

contract GasTestFoundry is DSTest {
    
    Contract1 c1;
    Contract2 c2;
    
    function setUp() public {
        c1 = new Contract1();
        c2 = new Contract2();
    }
    
    function testGas() public {
        c1.x();
        c2.x();
    }
}

contract Contract1 {
    
    uint256 public dummy;
    constructor() payable {
        dummy = 1;
    }
    
    function x() public {

    }
}

contract Contract2 {
    
    uint256 public dummy;
    constructor() {
        dummy = 1;
    }
    
    function x() public {
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 49563                                     ┆ 159             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤

╭───────────────────────────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ src/test/GasTest.t.sol:Contract2 contract ┆                 ┆     ┆        ┆     ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 49587                                     ┆ 172             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤

[G-12] Use custom errors rather than revert() / require() strings to save deployment gas  [~50 - 70 gas per instance]

Context:  SemiFungibleVault.sol#L91, SemiFungibleVault.sol#L116, Vault.sol#L165, Vault.sol#L187, PegOracle.sol#L23, PegOracle.sol#L24, PegOracle.sol#L25, PegOracle.sol#L28, PegOracle.sol#L98, PegOracle.sol#L99,PegOracle.sol#L103, PegOracle.sol#L121, PegOracle.sol#L122, PegOracle.sol#L126, StakingRewards.sol#L96, StakingRewards.sol#L119, StakingRewards.sol#L202, StakingRewards.sol#L217, StakingRewards.sol#L226

Description:  Custom errors are available from solidity version 0.8.4. Custom errors save ~50 gas each time they’re hitby avoiding having to allocate and store the revert string. Not defining the strings also save deployment gas.

https://blog.soliditylang.org/2021/04/21/custom-errors/

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    
    Contract0 c0;
    Contract1 c1;

    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
       c0.foo();
       c1.foo();
       }
    }

contract Contract0 {

    uint256 version;
    error Error_Message();

    function foo() external {
        if (version != 0) {
        revert Error_Message();
        }
    }
}

contract Contract1 {
 
    uint256 version;

    function foo() external {
    require(version == 0, "error");
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 33287                                     ┆ 196             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 2242            ┆ 2242 ┆ 2242   ┆ 2242 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41693                                     ┆ 239             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 2310            ┆ 2310 ┆ 2310   ┆ 2310 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

[G-13] Reduce the size of error messages (Long revert strings) [18 gas per instance]

Context:  SemiFungibleVault.sol#L118 StakingRewards.sol#L228

Description: Shortening revert strings to fit in 32 bytes will decrease deployment time gas and will decrease runtime gas when the revert condition is met. Revert strings that are longer than 32 bytes require at least one additional mstore, along with additional overhead for computing memory offset, etc.

Recommendation: Revert strings > 32 bytes or use Custom Error()

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0.foo();
        c1.foo();
    }
}

contract Contract0 {
    uint256 test1;
    
    function foo() external {
    require(test1 != 0, "This is Error");
    }
}

contract Contract1 {
    uint256 test1;
    
    function foo() external {
        require(test1 != 0, "Your Project Drop List Has Error with  ID and other parameters");
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 44093                                     ┆ 251             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 2334            ┆ 2334 ┆ 2334   ┆ 2334 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 51705                                     ┆ 290             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 2352            ┆ 2352 ┆ 2352   ┆ 2352 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

[G-14] Functions guaranteed to revert when callled by normal users can be marked payable [24 gas per instance]

Context:  StakingRewards.sol#L213 StakingRewards.sol#L225 VaultFactory.sol#L178 VaultFactory.sol#L253 VaultFactory.sol#L295 VaultFactory.sol#L329 VaultFactory.sol#L347 VaultFactory.sol#L366

Description: If a function modifier or require such as onlyOwner-admin is used, the function will revert if a normal user tries to pay the function. Marking the function as payable will lower the gas cost for legitimate callers because the compiler will not include checks for whether a payment was provided. The extra opcodes avoided are CALLVALUE(2),DUP1(3),ISZERO(3),PUSH2(3),JUMPI(10),PUSH1(3),DUP1(3),REVERT(0),JUMPDEST(1),POP(2), which costs an average of about 21 gas per call to the function, in addition to the extra deployment cost

Recommendation: Functions guaranteed to revert when called by normal users can be marked payable  (for only onlyowner or admin functions)

Proof Of Concept: The optimizer was turned on and set to 10000 runs.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }
    
    function testGas() public {
        c0.foo();
        c1.foo();
    }
}

contract Contract0 {
    uint256 versionNFTDropCollection;
    
    function foo() external {
        versionNFTDropCollection++;
    }
}

contract Contract1 {
    uint256 versionNFTDropCollection;
    
    function foo() external payable {
        versionNFTDropCollection++;
    }
}

Gas Report:

╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆       ┆        ┆       ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 44293                                     ┆ 252             ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg   ┆ median ┆ max   ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 22308           ┆ 22308 ┆ 22308  ┆ 22308 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬───────┬────────┬───────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆       ┆        ┆       ┆         │
╞═══════════════════════════════════════════╪═════════════════╪═══════╪════════╪═══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41893                                     ┆ 240             ┆       ┆        ┆       ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg   ┆ median ┆ max   ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ foo                                       ┆ 22284           ┆ 22284 ┆ 22284  ┆ 22284 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴───────┴────────┴───────┴─────────╯

[G-15] WETH address definition can be use directly

Context: VaultFactory.sol#L13

Description: WETH is a wrap Ether contract with a specific address in the Etherum network, giving the option to define it may cause false recognition, it is healthier to define it directly.

Advantages of defining a specific contract directly:

• It saves gas

WETH Address : 0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2

constructor(address _manager, address _weth) payable initializer {
        manager = IManager(_manager);
        WETH = _weth;
    }

Recommendation:

address private constant WETH = 0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2;

    constructor(address _manager) payable initializer {
        manager = IManager(_manager);
}

[G-16] Packing storage slots

Context: StakingRewards.sol#L36-L41

Description: A common gas optimization is packing structs or packing storage slots. This is the action of using smaller types like uint128 and uint96 next to each other in contract storage. When values are read or written in contract storage a full 256 bits are read or written. So if you can pack multiple variables within one 256 bit storage slot then you are cutting the cost to read or write those storage variables in half or more.

Current Code:

StakingRewards.sol#L36-L41
    // Slot 1
    uint256 public periodFinish = 0;
    // Slot 2
    uint256 public rewardRate;
    // Slot 3
    uint256 public rewardsDuration;
    // Slot 4
    uint256 public lastUpdateTime;
    // Slot 5
    uint256 public rewardPerTokenStored;
    // Slot 6
    uint256 public id;

Recommendation code:

StakingRewards.sol#L36-L41
    // Slot 1
    uint64 public periodFinish = 0;
    uint64 public id;
    uint64 public lastUpdateTime;
    uint64 public rewardsDuration;
    // Slot 2
    uint256 public rewardRate;
    // Slot 3
    uint256 public rewardPerTokenStored;

[S-01] Use v4.8.0 OpenZeppelin contracts

Description: The upcoming v4.8.0 version of OpenZeppelin provides many small gas optimizations.

https://github.com/OpenZeppelin/openzeppelin-contracts/releases/tag/v4.8.0-rc.0

v4.8.0-rc.0
💯 ERC4626 decimals changes: Remove decimals from on-chain calculations
⛽ Many small optimizations