Juicebox contest - bharg4v's results

Quality Assurance Report

Issues

1. Missing checks for address(0x0) when assigning values to address state variables

Zero address should be checked for state variables and some parameters in functions like mints, withdrawals... A zero address can lead into problems.

POC

220┆ _tierDelegation[_account][_tierId] = _delegatee; 

Instances

code4rena/2022-10-juicebox/contracts2/JB721TieredGovernance.sol L220
code4rena/2022-10-juicebox/contracts2/JBTiered721DelegateStore.sol 855
code4rena/2022-10-juicebox/contracts2/JBTiered721DelegateStore.sol 1124

Mitigation

Check zero address for state variables before assigning to them a value

2. _safeMint() should be used rather than _mint() wherever possible

_mint() is discouraged in favor of _safeMint() which ensures that the recipient is either an EOA or implements IERC721Receiver. Both open OpenZeppelin and solmate have versions of this function so that NFTs aren’t lost if they’re minted to contracts that cannot transfer them back out.

POC

461┆ _mint(_reservedTokenBeneficiary, _tokenId); 

Instances

code4rena/2022-10-juicebox/contracts2/JBTiered721Delegate.sol L461
code4rena/2022-10-juicebox/contracts2/JBTiered721Delegate.sol L504
code4rena/2022-10-juicebox/contracts2/JBTiered721Delegate.sol L635
code4rena/2022-10-juicebox/contracts2/JBTiered721Delegate.sol L677

Mitigation

“Unless there is a compelling reason, abi.encode should be preferred”. If there is only one argument to abi.encodePacked() it can often be cast to bytes() or bytes32() instead.

Gas Optimizations

The following sections detail the gas optimizations found throughout the codebase. Each optimization is documented with the setup, an explainer for the optimization, a gas report and line identifiers for each optimization across the codebase. For each section's gas report, the optimizer was turned on and set to 10000 runs. You can replicate any tests/gas reports by heading to 0xKitsune/gas-lab and cloning the repo. Then, simply copy/paste the contract examples from any section and run forge test --gas-report. You can also easily update the optimizer runs in the foundry.toml.

---

Mark storage variables as immutable if they never change after contract initialization.

State variables can be declared as constant or immutable. In both cases, the variables cannot be modified after the contract has been constructed. For constant variables, the value has to be fixed at compile-time, while for immutable, it can still be assigned at construction time.

The compiler does not reserve a storage slot for these variables, and every occurrence is inlined by the respective value.

Compared to regular state variables, the gas costs of constant and immutable variables are much lower. For a constant variable, the expression assigned to it is copied to all the places where it is accessed and also re-evaluated each time. This allows for local optimizations. Immutable variables are evaluated once at construction time and their value is copied to all the places in the code where they are accessed. For these values, 32 bytes are reserved, even if they would fit in fewer bytes. Due to this, constant values can sometimes be cheaper than immutable values.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    Contract2  c2;
    
    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
        c2 = new Contract2();
        
    }

    function testGas() public view {
        c0.addValue();
        c1.addImmutableValue();
        c2.addConstantValue();
    }
}

contract Contract0 {
    uint256 val;

    constructor() {
        val = 10000;
    }

    function addValue() public view {
        uint256 newVal = val + 1000;
    }
}

contract Contract1 {
    uint256 immutable val;

    constructor() {
        val = 10000;
    }

    function addImmutableValue() public view {
        uint256 newVal = val + 1000;
    }
}

contract Contract2 {
    uint256 constant val = 10;

    function addConstantValue() public view {
        uint256 newVal = val + 1000;
    }
}

Gas Report

╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 54593              ┆ 198             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addValue           ┆ 2302            ┆ 2302 ┆ 2302   ┆ 2302 ┆ 1       │
╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 38514              ┆ 239             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addImmutableValue  ┆ 199             ┆ 199 ┆ 199    ┆ 199 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract2 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 32287              ┆ 191             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addConstantValue   ┆ 199             ┆ 199 ┆ 199    ┆ 199 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

Lines

• JBTiered721Delegate.sol:48

Use assembly to write storage values

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;

    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }

    function testGas() public {
        c0.updateOwner(0x158B28A1b1CB1BE12C6bD8f5a646a0e3B2024734);
        c1.assemblyUpdateOwner(0x158B28A1b1CB1BE12C6bD8f5a646a0e3B2024734);
    }
}

contract Contract0 {
    address owner = 0xb4c79daB8f259C7Aee6E5b2Aa729821864227e84;

    function updateOwner(address newOwner) public {
        owner = newOwner;
    }
}

contract Contract1 {
    address owner = 0xb4c79daB8f259C7Aee6E5b2Aa729821864227e84;

    function assemblyUpdateOwner(address newOwner) public {
        assembly {
            sstore(owner.slot, newOwner)
        }
    }
}

Gas Report

╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 60623              ┆ 261             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ updateOwner        ┆ 5302            ┆ 5302 ┆ 5302   ┆ 5302 ┆ 1       │
╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 54823              ┆ 232             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ assemblyUpdateOwner┆ 5236            ┆ 5236 ┆ 5236   ┆ 5236 ┆ 1       │
╰────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

Lines

• JBTiered721Delegate.sol:226
• JBTiered721Delegate.sol:186
• JBTiered721Delegate.sol:225

Use calldata instead of memory for function arguments that do not get mutated.

Mark data types as calldata instead of memory where possible. This makes it so that the data is not automatically loaded into memory. If the data passed into the function does not need to be changed (like updating values in an array), it can be passed in as calldata. The one exception to this is if the argument must later be passed into another function that takes an argument that specifies memory storage.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    Contract2 c2;
    Contract3 c3;

    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
        c2 = new Contract2();
        c3 = new Contract3();
    }

    function testGas() public {
        uint256[] memory arr = new uint256[](10);
        c0.calldataArray(arr);
        c1.memoryArray(arr);

        bytes memory data = abi.encode("someText");
        c2.calldataBytes(data);
        c3.memoryBytes(data);
    }
}

contract Contract0 {
    function calldataArray(uint256[] calldata arr) public {
        uint256 j;
        for (uint256 i; i < arr.length; i++) {
            j = arr[i] + 10;
        }
    }
}

contract Contract1 {
    function memoryArray(uint256[] memory arr) public {
        uint256 j;
        for (uint256 i; i < arr.length; i++) {
            j = arr[i] + 10;
        }
    }
}

contract Contract2 {
    function calldataBytes(bytes calldata data) public {
        bytes32 val;
        for (uint256 i; i < 10; i++) {
            val = keccak256(abi.encode(data, i));
        }
    }
}

contract Contract3 {
    function memoryBytes(bytes memory data) public {
        bytes32 val;
        for (uint256 i; i < 10; i++) {
            val = keccak256(abi.encode(data, i));
        }
    }
}

Gas Report

╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract0 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 97947                                     ┆ 521             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ calldataArray                             ┆ 2824            ┆ 2824 ┆ 2824   ┆ 2824 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract1 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 128171                                    ┆ 672             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ memoryArray                               ┆ 3755            ┆ 3755 ┆ 3755   ┆ 3755 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract2 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 100547                                    ┆ 534             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ calldataBytes                             ┆ 4934            ┆ 4934 ┆ 4934   ┆ 4934 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯
╭───────────────────────────────────────────┬─────────────────┬──────┬────────┬──────┬─────────╮
│ src/test/GasTest.t.sol:Contract3 contract ┆                 ┆      ┆        ┆      ┆         │
╞═══════════════════════════════════════════╪═════════════════╪══════╪════════╪══════╪═════════╡
│ Deployment Cost                           ┆ Deployment Size ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 135183                                    ┆ 707             ┆      ┆        ┆      ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name                             ┆ min             ┆ avg  ┆ median ┆ max  ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ memoryBytes                               ┆ 7551            ┆ 7551 ┆ 7551   ┆ 7551 ┆ 1       │
╰───────────────────────────────────────────┴─────────────────┴──────┴────────┴──────┴─────────╯

Lines

• JB721GlobalGovernance.sol:55
• JB721TieredGovernance.sol:147
• JBTiered721Delegate.sol:480
• JBTiered721DelegateDeployer.sol:71
• JBTiered721DelegateProjectDeployer.sol:244
• JBTiered721DelegateStore.sol:1227

Use assembly to check for address(0)

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;

    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
    }

    function testGas() public view {
        c0.ownerNotZero(address(this));
        c1.assemblyOwnerNotZero(address(this));
    }
}

contract Contract0 {
    function ownerNotZero(address _addr) public pure {
        require(_addr != address(0), "zero address)");
    }
}

contract Contract1 {
    function assemblyOwnerNotZero(address _addr) public pure {
        assembly {
            if iszero(_addr) {
                mstore(0x00, "zero address")
                revert(0x00, 0x20)
            }
        }
    }
}

Gas Report

╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract0 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 61311              ┆ 338             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ ownerNotZero       ┆ 258             ┆ 258 ┆ 258    ┆ 258 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭──────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract1 contract   ┆                 ┆     ┆        ┆     ┆         │
╞══════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost      ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 44893                ┆ 255             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name        ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ assemblyOwnerNotZero ┆ 252             ┆ 252 ┆ 252    ┆ 252 ┆ 1       │
╰──────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

Lines

• JB721TieredGovernance.sol:249
• JBTiered721Delegate.sol:140
• JBTiered721DelegateDeployer.sol:99

Use assembly for math (add, sub, mul, div)

Use assembly for math instead of Solidity. You can check for overflow/underflow in assembly to ensure safety. If using Solidity versions < 0.8.0 and you are using Safemath, you can gain significant gas savings by using assembly to calculate values and checking for overflow/underflow.

contract GasTest is DSTest {
    Contract0 c0;
    Contract1 c1;
    Contract2 c2;
    Contract3 c3;
    Contract4 c4;
    Contract5 c5;
    Contract6 c6;
    Contract7 c7;

    function setUp() public {
        c0 = new Contract0();
        c1 = new Contract1();
        c2 = new Contract2();
        c3 = new Contract3();
        c4 = new Contract4();
        c5 = new Contract5();
        c6 = new Contract6();
        c7 = new Contract7();
    }

    function testGas() public {
        c0.addTest(34598345, 100);
        c1.addAssemblyTest(34598345, 100);
        c2.subTest(34598345, 100);
        c3.subAssemblyTest(34598345, 100);
        c4.mulTest(34598345, 100);
        c5.mulAssemblyTest(34598345, 100);
        c6.divTest(34598345, 100);
        c7.divAssemblyTest(34598345, 100);
    }
}

contract Contract0 {
    //addition in Solidity
    function addTest(uint256 a, uint256 b) public pure {
        uint256 c = a + b;
    }
}

contract Contract1 {
    //addition in assembly
    function addAssemblyTest(uint256 a, uint256 b) public pure {
        assembly {
            let c := add(a, b)

            if lt(c, a) {
                mstore(0x00, "overflow")
                revert(0x00, 0x20)
            }
        }
    }
}

contract Contract2 {
    //subtraction in Solidity
    function subTest(uint256 a, uint256 b) public pure {
        uint256 c = a - b;
    }
}

contract Contract3 {
    //subtraction in assembly
    function subAssemblyTest(uint256 a, uint256 b) public pure {
        assembly {
            let c := sub(a, b)

            if gt(c, a) {
                mstore(0x00, "underflow")
                revert(0x00, 0x20)
            }
        }
    }
}

contract Contract4 {
    //multiplication in Solidity
    function mulTest(uint256 a, uint256 b) public pure {
        uint256 c = a * b;
    }
}

contract Contract5 {
    //multiplication in assembly
    function mulAssemblyTest(uint256 a, uint256 b) public pure {
        assembly {
            let c := mul(a, b)

            if lt(c, a) {
                mstore(0x00, "overflow")
                revert(0x00, 0x20)
            }
        }
    }
}

contract Contract6 {
    //division in Solidity
    function divTest(uint256 a, uint256 b) public pure {
        uint256 c = a * b;
    }
}

contract Contract7 {
    //division in assembly
    function divAssemblyTest(uint256 a, uint256 b) public pure {
        assembly {
            let c := div(a, b)

            if gt(c, a) {
                mstore(0x00, "underflow")
                revert(0x00, 0x20)
            }
        }
    }
}

Gas Report

╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract0 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 40493              ┆ 233             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addTest            ┆ 303             ┆ 303 ┆ 303    ┆ 303 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract1 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37087              ┆ 216             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ addAssemblyTest    ┆ 263             ┆ 263 ┆ 263    ┆ 263 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract2 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 40293              ┆ 232             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ subTest            ┆ 300             ┆ 300 ┆ 300    ┆ 300 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract3 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37287              ┆ 217             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ subAssemblyTest    ┆ 263             ┆ 263 ┆ 263    ┆ 263 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract4 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41893              ┆ 240             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ mulTest            ┆ 325             ┆ 325 ┆ 325    ┆ 325 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract5 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37087              ┆ 216             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ mulAssemblyTest    ┆ 265             ┆ 265 ┆ 265    ┆ 265 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract6 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 41893              ┆ 240             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ divTest            ┆ 325             ┆ 325 ┆ 325    ┆ 325 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯
╭────────────────────┬─────────────────┬─────┬────────┬─────┬─────────╮
│ Contract7 contract ┆                 ┆     ┆        ┆     ┆         │
╞════════════════════╪═════════════════╪═════╪════════╪═════╪═════════╡
│ Deployment Cost    ┆ Deployment Size ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ 37287              ┆ 217             ┆     ┆        ┆     ┆         │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ Function Name      ┆ min             ┆ avg ┆ median ┆ max ┆ # calls │
├╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌┼╌╌╌╌╌┼╌╌╌╌╌╌╌╌╌┤
│ divAssemblyTest    ┆ 265             ┆ 265 ┆ 265    ┆ 265 ┆ 1       │
╰────────────────────┴─────────────────┴─────┴────────┴─────┴─────────╯

Lines

• JB721TieredGovernance.sol:323
• JBTiered721Delegate.sol:637
• JBTiered721DelegateProjectDeployer.sol:76
• JBTiered721DelegateStore.sol:685